Gold Member Since 2009
Audited Supplier
Jiangxi Xintao Technology Co., Ltd.

Molecular Sieve, Desiccant, Adsorbent manufacturer / supplier in China, offering New! 13X Molecular Sieve Bead Desiccant Dehydration, Xintao Professional Supplier for Sieve Zeolite 3A Catalyst Price, Molecular Sieve 3A for Dehydration of Cracked Gas and Olefins Desiccants and so on.

(/ )

Supplier Homepage Product Molecular Sieves New! 13X Molecular Sieve Bead Desiccant Dehydration

New! 13X Molecular Sieve Bead Desiccant Dehydration

FOB Price: US $1,650-2,200 / Ton
Min. Order: 1 Ton
Min. Order FOB Price
1 Ton US $1,650-2,200/ Ton
Get Latest Price
Port: Shanghai, China
Production Capacity: 8000 Ton/Year
Payment Terms: L/C, T/T, D/P, Western Union, Paypal, Money Gram, cash

Request a custom order and have something just for you!

Send Customized Request
Basic Info
  • Model NO.: XT-MS 13X
  • Grade Standard: Industrial Grade
  • Size: 1.7-2.5mm, 3-5mm
  • Purity: 85%
  • Transport Package: 25kg-30kg/CTN, 50-150kg/Drum; Inside Airtight
  • Origin: Pingxiang, Jiangxi, China
  • Appearance: Granule
  • Color: Light Grey
  • Certificated: ISO9001:2008
  • Trademark: XINTAO
  • Specification: ISO9001: 2008
  • HS Code: 3824999990
Product Description
Product introduction:
  Xintao Molecular Sieve 13X is the sodium form of the type X crystal and has a much larger pore opening than the type A crystals. It will adsorb molecules with a kinetic diameter of less than 10 Angstrom (1.0 nm) and exclude those larger. It also has the highest theoretical capacity of the common adsorbents and very good mass transfer rates. It can remove impurities too large to fit into a type A crystal and is commonly used to separate nitrogen from oxygen. 

Technical Parameter
Model13X
ColorLight gray
Nominal pore diameter10 angstroms
ShapeSpherePellet
Diameter (mm)1.7-2.5 (8*12 mesh)3.0-5.0 (4*8 mesh)1.6 (1/16 inch)3.2 (1/8 inch)
Size ratio up to grade (%)≥98≥98≥96≥96
Bulk density (g/ml)≥0.68≥0.68≥0.65≥0.65
Wear ratio (%)≤0.20≤0.20≤0.40≤0.40
Crushing strength (N)≥30/piece≥85/piece25/piece65/piece
Static H2O adsorption (%)≥25≥25≥25≥25
Static CO2 adsorption (%)≥17≥17≥17≥17
Water content (%)≤1.5≤1.5≤1.5≤1.5
Typical Chemical FormulaNa2O. Al2O3. (2.8±0.2) SiO2. (6~7)H2O
SiO2: Al2O3 ≈2.6-3.0
Typical Applicationa) Removal of CO2 and moisture from air (air pre-purification) and other gases. 
b) Separation of enriched oxygen from air. 
c) Removal of n-chained compositions from aromatics. 
d) Removal of R-SH and H2S from hydrocarbon liquid streams (LPG, butane etc. )
e) Catalyst protection, removal of oxygenates from hydrocarbons (olefin streams). 
f) Production of bulk oxygen in PSA units. 
Warrantya)By National Standard HG-T_2690-1995
b)Offer lifetime consultation on problems occurred

Regeneration: 
Xintao molecular sieve Type 13X can be regenerated by either heating in the case of thermal swing processes; or by lowering the pressure in the case of pressure swing processes. 
To remove moisture from a 13X molecular sieve, a temperature of 250-300°C is required. A properly regenerated molecular sieve can give moisture dew points below -100°C, or mercaptans or CO2 levels below 2 ppm. 
The outlet concentrations on a pressure swing process will depend on the gas present, and on the conditions of the process 

Size
13X - Zeolite are available in beads of 1-2 mm(10x18 mesh), 2-3 mm(8x12 mesh), 2.5-5 mm(4x8 mesh) and as powder, and in pellet 1.6mm, 3.2mm. 

Attention
To avoid damp and pre-adsorption of organic before running, or must to be reactivated. 

New! 13X Molecular Sieve Bead Desiccant Dehydration
New! 13X Molecular Sieve Bead Desiccant Dehydration
New! 13X Molecular Sieve Bead Desiccant Dehydration
New! 13X Molecular Sieve Bead Desiccant Dehydration


 
Send your message to this supplier
Avatar
Ms. Daisy Liu
*From:
To: Ms. Daisy Liu
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now

Find Similar Products By Category